Switch with passive infrared ray movement sensor
BT-K4430
|
8005543612538
Description
The Living Now motion sensor allows automatic switching on and off by presence detection when natural light is insufficient.
Product characteristics
- Adjustable brightness threshold for automatic light release: the light does not switch on when the natural lighting is sufficient
- The device must be completed with the type 17SL cover
- Screw and plate terminals
- Easy installation and removal of the mechanism on the support frame thanks to the new generation of plastic hooking system
- Used to control dimmable LED loads, dimmable FCL, very low voltage halogen (TBT), 230V halogen and incandescent. Powered to 100-230 Va.c.
Recommendations / Restrictions
- For internal use only.
Products benefits
Installation
- Possibility to install up to 3 devices in parallel.No need to place the neutral cable.
Usage
- Adjustable light switch-off: from 10 seconds to 10 minutes.Possibility to manage the permanent switching on and off in manual mode through a selector operated by the cover.
Advantages
- It is coordinated with the L.NOW aesthetic
- Suitable for all LED light loads included
Technical Characteristics
Model
Movement sensor
Movement sensor/presence detector technology
Passive infrared
Constant light control
Yes
HVAC-control
No
Forced switch on
No
Forced switch off
No
Animal zone
No
Creep-under protection
Yes
Background monitoring
No
Networkable
No
Scan angle
120 °
Optimum mounting height
1.2 m
Staircase light controller
Yes
Bridging switch
No
Max. reach sideways
6 m
Max. presence range
40 m²
Max. reach frontally
8 m
Diameter reach on floor
8 m
Suitable for wireless transmission
No
Remote operation
No
Supplied remote control
No
Response value sensitivity adjustable
Yes
Response value luminosity adjustable
Yes
With signal unit
No
Teach-function for response value luminosity
No
Dim function with dimmer basic element
No
Mounting method
Flush-mounted
Suitable for ceiling mounting
Yes
Ceiling built-in mounting without installation box
No
Suitable for wall mounting
Yes
Connection type
Insulation displacement connector
Material
Plastic
Material quality
Thermoplastic
Halogen free
Yes
Surface protection
Untreated
Surface finishing
Matt
Antimicrobial treatment
No
Colour
Black
RAL-number (similar)
7015
Transparent
No
Degree of protection (IP)
IP20
degree of impact strength (IK)
IK04
Voltage type
AC
Frequency (Min-Max)
50-60 Hz
Nominal voltage (Min-Max)
100-240 V
Min. switch-on time
10 s
Max. duty cycle
10 min
Detection angle horizontal (Min-Max)
30-120 °
Response value luminosity (Min-Max)
5-1275 lx
Max. switching power
250 W
Max. switching power LED
100 W
Suitable for C-load
No
Number of switching zones
1
Max. starting current
1 A
Min. starting current
0.02 A
Substation input
No
With alarm function
No
With acoustic sensor
No
Ambient temperature (Min-Max)
5-40 °C
Width
44 mm
Height
51 mm
Depth
47 mm
Min. depth of built-in installation box
50 mm
With connection cable
No
Connection cable length
0 mm
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
Compatible with Casambi
No
IFTTT support available
No
Operating / setting temperature (Min-Max)
5-40 °C
Storage temperature (Min-Max)
-10-70 °C
Mandatory neutral
Yes
Terminal marking indication
No
Terminals capacity (Min-Max)
0.8-1.5 mm²
Cable nature for connection
Flexible
Label space/information surface
No
Entry membrane gland type
Flexible to cut
Auto switch
No
With DALI interface
No
Documentation
2 documents
Technical Sheet
F02697EN/00 | PDF (481 KB) | EN
Technical Sheet
ST-00000959-EN_VER1 | PDF (493 KB) | EN
1 documents
BIM Data
BIM-BTICINO-LIVING-NOW-2025-ENGLISH | RVT (145 MB) | EN
4 documents
Brochure
BRO-LNOW-2M | PDF (15.9 MB) | EN
Brochure
BRO-LNOW-3M | PDF (16.3 MB) | EN
Catalog Commercial Page
CAT-LNOW-2M | PDF (23.1 MB) | EN
Catalog Commercial Page
CAT-LNOW-3M | PDF (22.5 MB) | EN