Make up the room/do no disturb lampholder
BT-RW4373H
|
8005543636787
Description
Double optical signalling: “do not disturb” and “rearrange the room” , for outdoor application in the Hotel. 1 module, color white
Product characteristics
- Double optical signalling: “do not disturb” and “rearrange the room” , for outdoor application in the Hotel
- 1 module
- color white
- screw terminals
- The led can be substitute
Recommendations / Restrictions
- Indoor use only.
Products benefits
Installation
- To be combined with the cod. RG4028H indoor the hotel room
Usage
- If activated the switch inside the room, the indicator will be illuminated in the "do not disturb" or "rearrange the room" signal
Technical Characteristics
Assembly arrangement
Basic element with central cover plate
Number of modules (module system)
1
Lamp holder
Other
With light source
Yes
Lamp type
LED exchangeable
With flashlight
No
With fixed symbol/imprint
Yes
With exchangeable symbol
No
Application as button
No
Mounting method
Flush-mounted
Type of fastening
Engage (snap)
Material
Plastic
Material quality
Thermoplastic
Halogen free
Yes
Surface protection
Untreated
Surface finishing
Matt
Colour
White
RAL-number (similar)
9003
Transparent
No
Colour light source
White
Suitable for degree of protection (IP)
IP20
Nominal voltage
230 V
Max. lamp power
5 W
Device width
22.3 mm
Device height
45.1 mm
Device depth
42.7 mm
Built-in depth
32.9 mm
degree of impact strength (IK)
Not applicable
Operating / setting temperature (Min-Max)
-5-50 °C
Storage temperature (Min-Max)
-10-70 °C
Voltage type
AC
Supply current (Min-Max)
8-10 A
Frequency (Min-Max)
50-60 Hz
Mandatory neutral
No
Terminal marking indication
No
Stress test conformity (1000V)
No
Antimicrobial treatment
No
Connection type
Screwed terminal
Cable nature for connection
Flexible or rigid
Cable section (Min-Max)
1.5-2.5 mm²
Label space/information surface
No
Documentation
1 documents
Technical Sheet
IDP000251_02-EN | PDF (377 KB) | EN
1 documents
Catalog Commercial Page
3210144 | PDF (9.4 MB) | EN