1. Catalogue
  2. Low-voltage protection and power distribution
  3. Btdin modular protection and command devices
  4. Surge protective devices (SPD)
  5. BT-F10HZC2
  • SPD + Mcb - 1P+N - Type T2 - Imax=40kA - Up=1.7kV - Uc=320Vac - 2+2 modules
Btdin BTicino

SPD + Mcb - 1P+N - Type T2 - Imax=40kA - Up=1.7kV - Uc=320Vac - 2+2 modules

BT-F10HZC2 | 8005543667194
Surge protection device (SPD) with modular circuit breaker associated - 1P+N - Type T2 - Imax=40kA - Up=1,7kV - Uc=320Vac - 2+2 modules - with auxiliary contact
Description

Add-on surge protective devices for installations supplied with 230/400 V (50-60 Hz). SPDs T2 (Class II) recommended for the protection of secondary distribution boards.

Product characteristics
  • IP20
  • 1P+N
  • Imax=40kAUp=1,7kVUc=320Vac
  • 2+2 modules
  • with auxiliary contact
Recommendations / Restrictions
  • To ensure proper protection, a lightning arrester is recommended:- at the origin of each installation (obligatory depending on the type and location of the installation to be protected,- at the origin of divisional switchboards: secondary protection or fine protection of sensitive equipment,- on all outputs of external electrical circuits (supply to secondary buildings, external lighting or external electrical panels, etc.).A communication network arrester should always be installed to protect communication equipment in the presence of lightning arresters on the low-voltage network.Translated with www.DeepL.com/Translator (free version)
Products benefits
Installation
  • On 35 mm DIN rail according to DIN 35 profile or EN 60715, rails 7.5 or 15 mm deep.
Usage
  • Equipped with an auxiliary unit for the remote monitoring of the status of both the SPD and also the associated MCB.
Technical Characteristics
System configuration DC No
System configuration TN Yes
System configuration TN-C Yes
System configuration TN-C-S Yes
Degree of protection (IP) IP20
Documentation
2 documents
Technical Sheet
IDP000311EN_01 | PDF (572 KB) | EN
Instruction Use
LE12003AA | PDF (578 KB)