Smart device for controlling devices with absorption up to 80A
BT-FC80AC
|
8005543706022
Description
Btdin with Netatmo CONNECTED DRY CONTACT with maintained contacts 100 - 240V~ 50/60Hz with a single-phase closed 80A coil to remote-control loads via their dry contact input in off-peak/peak time or ON/OFF (real time or programmed) modes.
Product characteristics
- Equipped with a dry contact input: 12V/30V DC or 230V ~ Imin 0,01A / Imax 2A
- Maintained contact. Normaly closed or normaly closed
- Energy consumption: equipped with a single-phase up to 80A closed measurement coil to get energy data to whom the Connected Dry Contact is wired to.
- Compatible with the load shedding scenario. Works with the Connected Load Shedder 412172
- Keep constantly up-to-date with the consumption of your appliance and remotely remote-control it from your smartphone wherever you are within the Home + Control app.
Recommendations / Restrictions
- Requires beforehand the installation of a "With Netatmo" gateway such as for example the Control module, the Power-outlet gateway, etc… When working on electricity for your safety turn-off the main protection device in the electrical panel-board.
Products benefits
Installation
- Easy cabling part. All configuration steps are done within the smartphone app Home + Control
Usage
- Scheduling: automatic opening and reclosing action scenarios based on a timeline. (daily/weekly/specific events such as “holidays”) or the Off-peak/peak time electrical contract
Advantages
- Versatile offer: can fit anykind of loads with dry contact input terminal such as electrical vehicules charging stations, watering system, ventilation system, etc…
- Voice assistant compatible
- Part of the Legrand Connected Home environement. Works with Home+ Control smartphone app
Technical Characteristics
Supply voltage AC 50 Hz (Min-Max)
100-240 V
Supply voltage AC 60 Hz (Min-Max)
100-240 V
Voltage type (supply voltage)
AC
Number of digital inputs
1
Number of digital outputs
1
Digital inputs configurable
No
Digital outputs configurable
No
Input current at signal 1
0.5 mA
Permitted voltage at input (Min-Max)
0-240 V
Type of voltage (input voltage)
AC
Type of digital output
Relay
Permitted voltage at output (Min-Max)
5-250 V
Type of output voltage
AC/DC
Short-circuit protection, outputs available
No
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces wireless
1
Number of HW-interfaces USB
0
Number of HW-interfaces other
0
With optical interface
No
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for Modbus
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Mobile communications standard 3G (UMTS)
No
IO link master
No
System accessory
No
Degree of protection (IP)
IP3X
Type of electric connection
Screw connection
Time delay at signal change (Min-Max)
200-300 ms
Fieldbus connection over separate bus coupler possible
No
Suitable for rail mounting
Yes
Wall mounting/direct mounting
No
Front built-in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
SIL according to IEC 61508
None
Performance level according to EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
17.8 mm
Height
95.9 mm
Depth
71 mm
Documentation
2 documents
Agreement
LGMVVEVWXT | FILE (162 KB) | EN · IT
PEP-EPD
LGRP-02216-V01.01-EN | PDF (944 KB) | EN
1 documents
Brochure
3246839 | PDF (8.1 MB) | EN