LivingLight - Temperature control panel
BT-LN4691KNX
|
8005543567975
Description
1,6’ backlight display with 4 push-buttons embedding a temperature probe to control different types of heating/cooling system (FCU, heating/cooling valve, fan, electric load, …) in combination with dedicated KNX HVAC controller
Product characteristics
- 1,6’ backlight display
- 4 push-buttons to control operating mode, temperature setpoint and fan speed
- Temperature probe: -0°C to +40°C
- Power supply from KNX bus: 6 mA (OFF) / 9 mA (Backlight min ) / 16 mA (Backlight max)
- To be equipped with Arteo or/ Mosaic support frames and plates
Recommendations / Restrictions
- Configuration through ETS tool from KNX association
Products benefits
Installation
- KNX mechanism completely suitable with the other parts of LIVING LIGHT switch: support, cover plateConnected with the BUS/KNX cable
Usage
- End user interface suitable with KNX HVAC controller embedding specific thermoregulation algorithm
Advantages
- Display of measured temperature or set temperature value
- Selection of unit of measurement: °C or °F
Technical Characteristics
Bus system KNX
Yes
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
None
Radio frequency bidirectional
No
Mounting method
Flush-mounted
With anti-theft/dismantling protection
No
With bus connection
Yes
Number of actuation points
4
Number of buttons
2
With LED indication
Yes
With label area
No
With display
Yes
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Colour
Black
RAL-number (similar)
9011
Transparent
No
With room temperature controller
Yes
With IR sensor
No
Degree of protection (IP)
IP20
Min. depth of built-in installation box
55 mm
Width
45 mm
Height
45 mm
Depth
24 mm
degree of impact strength (IK)
Other
Storage temperature (Min-Max)
-10-70 °C
Frequency (Min-Max)
0-0 Hz
Terminal marking indication
Yes
Halogen free
No
Antimicrobial treatment
No
Terminals capacity (Min-Max)
0.34-2.5 mm²
Cable nature for connection
Flexible or rigid
Programmable
Yes
Documentation
1 documents
Instruction Use
LE09072AC | PDF (393 KB)
1 documents
3D Autocad
3D_LN4691KN_A-ASS-2 | IFC (14.6 MB)
2 documents
Brochure
BRO-KNX | PDF (7 MB) | EN
Catalog Commercial Page
CAT-KNX | PDF (6.1 MB) | EN
2 documents
Firmware
FW_BT-H4691KNX | ZIP (21 KB)
Firmware
FW_LG-002638_2 | ZIP (8.1 MB)