1. Catalogue
  2. Zucchini Busbar systems
  3. High power busbar - XCP-S
  4. Connection interfaces with exit bars
  5. ZU-64281004P
  • Connection interface with exit bars XCP-S (Al). Right Type 2 standard - In= 1250A
  • Connection interface with exit bars XCP-S (Al). Right Type 2 standard - In= 1250A
  • Connection interface with exit bars XCP-S (Al). Right Type 2 standard - In= 1250A
  • Connection interface with exit bars XCP-S (Al). Right Type 2 standard - In= 1250A
XCP-S ZUCCHINI

Connection interface with exit bars XCP-S (Al). Right Type 2 standard - In= 1250A

ZU-64281004P | 8033777450763
XCP-S - connection interface with exit bars (Al). Right Type 2 standard - In= 1250A
Description

XCP-S, standard connection interfaces are used at the end of the lines to connect the busbar to boards or transformers

Product characteristics
  • Degree of protection IP55, Sprinkler proof resistance
  • Rated operational voltage Ue=1000V, Rated insulation voltage Ui=1000V
  • Losses for the Joule effect at nominal current P=373 W/m
  • The outer casing of the XCP-S line consists of four C-ribbed section bars, bordered and riveted (thickness 1.5mm), with excellent mechanical, electric and heat loss efficiency
  • The sheet metal is made of galvanized steel, treated according to UNI EN10327 and painted with RAL7035 resins with a high resistance to chemical agents
Recommendations / Restrictions
  • Before proceeding with the installation and subsequent commissioning, carefully read the installation manual
Products benefits
Installation
  • Allows to electrically power the XCP line to distribution board or transformer
Advantages
  • Product fully in compliance with the following Standards: IEC 61439-6
  • Product suitable for these climates: IEC 60068 2-11: Environmental tests Part 2-11 test Ka: Salt mist; IEC 60068 2-30: Environmental tests Part 2-30 test Db: Damp heat, cyclic(12 h + 12 h cycle)
Technical Characteristics
Model Single
Rated current AC 50 Hz 1250 A
Number of poles 4
Number of conductors (without earthing) 4
Flexible No
Rated voltage AC 50 Hz (Min-Max) 0-1000 V
Colour Grey
RAL-number 7035
Degree of protection (IP) IP55
Length 500 mm
Width 120 mm
Height 170 mm
degree of impact strength (IK) IK10
Operating / setting temperature (Min-Max) -5-35 °C
Nominal voltage (Min-Max) 0-1000 V
Terminal marking indication Yes
Halogen free Yes
Documentation
1 documents
Technical Sheet
F03376EN/05 | PDF (2.8 MB) | EN
3 documents
PEP-EPD
LGRP-01268-V02.01-EN_LG-EU | PDF (898 KB) | EN
PEP-EPD
LGRP-02327-V01.01-EN_BT-EU | PDF (901 KB) | EN
Agreement
LGSCHYZUYH | FILE (1 MB) | EN
1 documents
Catalog Commercial Page
3201961 | PDF (29.5 MB) | EN