Intermediate feed unit for busbar Al XCM250 - In=250A
ZU-53401202
|
8033777604333
Description
XCM IP55 busbar dedicated to the distribution of power in medium to large installations, including rising mains, in commercial and residential buildings
Product characteristics
- Intermediate feed unit for Al straight element 3P + N + PE casing
- Protection degree IP55
- XCM casing made of galvanized steel used as protective earth (PE), conductors insulators are made by fiberglass reinforced plastic material, ensuring a V0 selfextinguishing degree, the whole busbar is fire retardant in compliance with the IEC 60332-3 standard
- Losses for the Joule effect at nominal current P=72 W/m
- XCM range conform to EN 61439-1 and IEC 61439-6 standards
Recommendations / Restrictions
- Before proceeding with the installation and subsequent commissioning, carefully read the installation manual
Products benefits
Installation
- Easy and secure junction by a monobloc system with a dynamometric bolt
Usage
- Energy Performance: Joule effect losses reduced by the XCM design and the conductive materials used
Advantages
- High short-circuit performance: Rated short-time current Icw=25kA@0,1s, peak current Ipk=53kA
- High rated operational voltage and rated insulation voltage: Ue=1000V / Ui=1000V
- Allows you to electrically power the XCM line through a cable line or directly connected to a distribution board
Technical Characteristics
Rated current AC 50 Hz
250 A
Power supply position
Centre
Model
Single
Number of poles
3
Rated voltage AC 50 Hz (Min-Max)
0-1000 V
Colour
Grey
Degree of protection (IP)
IP55
Length
600 mm
Width
290 mm
Height
400 mm
Nominal voltage (Min-Max)
0-1000 V
Halogen free
Yes
Connection type
Screwed terminal
Number of terminals
4
Cable nature for connection
Flexible or rigid
Documentation
2 documents
Technical Sheet
F04615EN/00 | PDF (4.1 MB) | EN
Installation Guide
LE13878AA_EN | PDF (46.1 MB) | EN
1 documents
Catalog Commercial Page
3199522 | PDF (39 MB) | EN