Removable and rechargeable torch with automatic switching on device
BT-K4380
|
8005543612514
Description
The removable and rechargeable torch with automatic ignition device of L.NOW automatically turns on in case of power failure - 2 hours autonomy
Product characteristics
- Push & pull extraction system (press and extract) complete with charging base - ON / OFF switch and SPOT button to increase brightness when necessary - Ni-MH interchangeable batteries without "memory" effect
- The device must be completed with the type 04 cover
- Screw and plate terminals
- Easy installation and removal of the mechanism on the support frame thanks to the new generation of plastic hooking system
- Low stand-by consumption 0.4 W - power supply 230 Va.c. - 2 modules
Recommendations / Restrictions
- For internal use only.
Products benefits
Installation
- Simple installation - replacement battery available (480NB)
Usage
- The torch lights up in the event of a blackout, allowing it to be extracted and used to reach the switchboard and reactivate the current
Advantages
- Replaceable battery (4380N)
- It is coordinated with the L.NOW aesthetic
Technical Characteristics
Mounting method
Built-in
Function
Escape route lighting
Suitable for labelling type
Other
Type of indicator
Single-sided
With pictogram
No
Suitable for continuous circuit
Yes
With remote switch connection
No
Supplied remote control
No
Emergency function monitoring system
None
Emergency power supply system
Central (central battery)
Battery technology
NiMH
Lamp type
LED not exchangeable
With light source
Yes
Lamp holder
None
Number of lighting heads
1
Housing material
Plastic
Housing colour
Other
Material cover
Plastic, opal
Voltage type
AC
Nominal voltage (Min-Max)
110-220 V
Type of control gear
Not required
Exchangeable control gear
No
Light distributor
Diffuser lens/optic/panel
Constant light output (CLO)
No
Degree of protection (IP)
IP30
degree of impact strength (IK)
IK04
Rated ambient temperature according to IEC 62722-2-1 (Min-Max)
-5-35 °C
Rated luminous flux according to IEC 62722-2- 1 (Min-Max)
0-0 lm
Colour temperature (Min-Max)
4000-5500 K
Recognition distance
5 m
Nominal operation time (Min-Max)
2-2 h
Width
45 mm
Height/depth
50 mm
Length
45 mm
Connectable conductor cross section (Min-Max)
0.5-1.5 mm²
Operating / setting temperature (Min-Max)
5-40 °C
Storage temperature (Min-Max)
-10-70 °C
Frequency (Min-Max)
50-60 Hz
Mandatory neutral
Yes
Terminal marking indication
No
Cable nature for connection
Flexible
With complemantary luminous signal
No
Maximum Input cable diameter
1.5 mm
Vertical fixing center distance (Min-Max)
3.5-3.7 mm
Horizontal fixing center distance (Min-Max)
3-3.2 mm
Cable support
Screw cable clamp
Cable tie suitable with
All conduit/cable types
Control mode
Wired
Contains Batteries and/or Accumulator
Yes
Addressable
No
Battery ou Accumulator (Pack1)
Accumulator (rechargeable)
Element Composition (Pack1)
Nickel metal hydride
Number of Pack 1
1
Number of Single Element (Pack1)
2
Single Element weight (Pack1)
10 g
Pack1 Location
Product includes a battery
Regulation Type (Pack1)
I : Industrial (not Portable)
Connected object
No
Documentation
2 documents
Instruction Use
LE10379AA | PDF (2 MB)
Technical Sheet
ST-00000223-EN | PDF (335 KB) | EN
1 documents
BIM Data
BIM-BTICINO-LIVING-NOW-2025-ENGLISH | RVT (145 MB) | EN
4 documents
Brochure
BRO-LNOW-2M | PDF (15.9 MB) | EN
Brochure
BRO-LNOW-3M | PDF (16.3 MB) | EN
Catalog Commercial Page
CAT-LNOW-2M | PDF (23.1 MB) | EN
Catalog Commercial Page
CAT-LNOW-3M | PDF (22.5 MB) | EN