Axolute BTicino

Reading lamp dimmable

Name: Reading lamp dimmable
Brand: BTicino
SKU: BT-HS4362
Availability: InStock

BT-HS4362 | 8005543537169

Reading lamp dimmable - installing the head of the bed allowing you to have a directional Light. It is equipped with a flexible arm (lenght 31 cm) that allows you to orient the illuminating ends. The Light intensity can be dimmed by pressing and holding the On / Off integrated command. It can also be connected to a remote control and, if necessary, you can disable the built-in command with a 30 sec pressure. - LED Light - Consumption 3W - Luminous Flux 110 lumens (equivalent to 15W incandescent) - Duration 40.000 hours - 1 module (recessed) - anthracite

Compare

Technical Characteristics

Suitable for wall mounting Yes

Suitable for suspended mounting No

Suitable for ceiling mounting No

Suitable for built-in mounting Yes

Suitable for surface mounting No

Suitable for light line configuration No

Suitable for workplace according to EN 12464-1 No

Lamp type LED not exchangeable

With light source Yes

Lamp holder Other

Housing material Plastic

Housing colour Grey

Material cover Plastic, opal

Type of grid Matt

Voltage type AC

Nominal voltage (Min-Max) 230-250 V

Nominal current (Min-Max) 15-25 mA

Type of control gear LED operating device voltage-controlled

With control gear No

Dimmable No

Dimming 0-10 V No

Dimming 1-10 V No

Dimming DALI No

Dimming DMX No

Dimming DSI No

Dimming manufacturer's proprietary system No

Dimming mains voltage modulation No

Dimming phase cut-off (trailing edge) No

Dimming phase cut-on (leading edge) No

Dimming programmable No

Dimming potentiometer (integrated) No

Dimming RF No

Dimming Touch and Dim No

Dimming Zigbee No

Dimming with push-button No

Light distribution Symmetric

Beam angle > 80° - Extreme wide beam

Light outlet Direct

Degree of protection (IP), rear side IP41

Protection class according to IEC 61140 None

Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 No

Rated ambient temperature according to IEC 62722-2-1 (Min-Max) -5-46 °C

Luminous flux in emergency mode 246 lm

Suitable for emergency lighting Yes

With movement sensor No

With light sensor Yes

Covering of the luminaire with thermally insulating material possible No

With air slots Yes

Suitable for lamp power (Min-Max) 0.1-0.1 W

Luminaire efficacy (Min-Max) 0-0 lm/W

Max. system power 0.3 W

Rated luminous flux according to IEC 62722-2- 1 (Min-Max) 246-246 lm

Colour of light White

Colour temperature (Min-Max) 4000-5500 K

Colour rendering index CRI 80-89

Width 22 mm

Height/depth 170 mm

Length 48 mm

Built-in length 44 mm

Built-in width 22 mm

Built-in height/depth 170 mm

Connectable conductor cross section (Min-Max) 1.5-2.5 mm²

Luminous intensity (Min-Max) 0-0 cd

Operating / setting temperature (Min-Max) -5-45 °C

Storage temperature (Min-Max) -10-65 °C

Frequency (Min-Max) 50-50 Hz

Standby consumption 136 mA

Mandatory neutral No

Halogen free Yes

Antimicrobial treatment No

Cable nature for connection Flexible

With socket outlet No

Fitted with rainproof plate protection No

With complemantary luminous signal No

Supplied remote control No

Maximum Input cable diameter 2.5 mm

Vertical fixing center distance (Min-Max) 4.5-4.5 mm

Cable support Screw cable clamp

Control mode Wired

Connected object No

Documentation

Technical Sheet

F02072EN/01 | PDF (1.1 MB) | EN

Instruction Use

LE07814AA | PDF (1.2 MB)

Catalog Commercial Page

3211578 | PDF (16.1 MB) | EN

Reading lamp dimmable

Download preferences