KNX/Modbus RS485 converter interface
IM-IF1KNX
|
8032826335549
Description
Interface in 2 MODBUS / KNX DIN modules, allows to share measurement data from the ModBus side to the KNX side and vice versa
Product characteristics
- Power supply 95 to 265Vac
- Equipped with 1 connector for KNX, 1 connector for ModBus and 1 connector for quick connection with the power supply
- Protected against usual bodies up to 12.5mm wide: IP20 according to IEC / EN 60529.
Products benefits
Installation
- The interface converts between the ModBus RS485 protocol of the Multifunction and IME Counters and the KNX protocol.
Technical Characteristics
Transmission rate
9.6 kBit/s
Service primary side
Other
Connection type primary side
Screw connection
Service secondary side
RS-485
Connection type secondary side
Screw connection
Bi-directional
Yes
Overcurrent protection
Yes
Galvanic separation
Active
Nominal electricity consumption
0.5 mA
Width
17.8 mm
Height
94.8 mm
Depth
64.9 mm
degree of impact strength (IK)
IK05
Degree of protection (IP)
IP40
Operating / setting temperature (Min-Max)
-25-55 °C
Storage temperature (Min-Max)
-40-70 °C
Nominal voltage (Min-Max)
95-250 V
Halogen free
Yes
Connection type
Screwed terminal
Mounting method
Busbar system
Documentation
3 documents
Technical Sheet
IDP000187EN_04 | PDF (3.4 MB) | EN
Technical Sheet
IDP000187FR | PDF (2.9 MB) | EN · FR
Instruction Use
LE11148FR | PDF (550 KB) | EN · FR
1 documents
Catalog Commercial Page
3226373 | PDF (16.9 MB) | EN