2 modules shutter/tilt actuator/control with 2 internal relay.To be completed with 1 or 2-module covers.
BT-Y4672M2ST
|
8005543827192
Description
Shutter actuator with relay 2 A 250 VA. In addition to the monostable and bistable UP/DOWN function, the actuator also places the rolling shutter in a stored (PRESET) position. tilt positions
Product characteristics
- Compatibility with slat is ensured for traditional motors and shutter technical specifications whereby, at the lower limit stop, the slats are fully closed and reopen when the shutter is raised
- 2 modules. To be completed with 1 or 2- modules key covers, support frames and plates.
- ower supply from SCS BUS: 18-27 Vdc.Power consumption: 9 mA standby, 17 mA max (one load), 26 mA max (two loads).Load rating: 110-230 Vac, 2 A, 250 VA.Operating frequency: 50/60 Hz
- Calibration (manual from the device or advanced from H+P) enables management of up to 5
- Packaging 100% plastic free: delivered with dedicated and new packaging in 100% paper, water-based painted and use of ecological glues.
Recommendations / Restrictions
- Indoor usage only
Products benefits
Installation
- in standard boxes like wiring devices range
Usage
- H+P is the tool dedicated to installer which simplifies the configuration process of the command. In addition to local control, it can be managed through the Home + Control app and touchscreen interfaces for greater convenience and advanced automation
Advantages
- The control experience is now improved with the management of multiple functions (up to 4 functions on 2 modules) over the same modularity following market trends and the advanced home automation systems.Shutters can be combined in different ways and personalized with new dedicated key covers.
- Management of tilt function is achieved through five slat tilt positions (indicatively fully closed 0°, 20°, 45°, 70°, and fully open 90°), which can be controlled via physical commands, the Home + Control app, or touchscreens, ensuring complete system integration
- As part of MyHome system, supports advanced automation, scenario management and return-state functionality
Technical Characteristics
Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system KNX Secure
No
Bus system KNX Secure-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
Other
Radio frequency bidirectional
No
Number of linkable devices
1
Mounting method
Flush-mounted
Width in number of modular spacings
2
Local operation/hand operation
Yes
With LED indication
Yes
Number of digital inputs
3
Suitable for C-load
No
Max. number of switching contacts
2
Max. switching current
2 A
Rated operating voltage (Min-Max)
110-230 V
Different phases connectable
Yes
With bus connection
Yes
Bus module detachable
No
Min. depth of built-in installation box
43 mm
Modular expandability
No
Degree of protection (IP)
IP20
Width
45 mm
Height
45 mm
Depth
40 mm
degree of impact strength (IK)
IK04
Operating / setting temperature (Min-Max)
-5-36 °C
Storage temperature (Min-Max)
-10-71 °C
Voltage type
AC
Terminal marking indication
Yes
Type of load
Universal and LED Retrofit
Connection type
Screwed terminal
Number of distribution blocks
4
Terminals capacity (Min-Max)
0.34-2.5 mm²
Connection type
Not applicable
Label space/information surface
No
Fitted with USB plug
No
Addressable
Yes
Connected object
No
With voice command
No
Programmable
Yes
Interoperable connection Protocol
Yes
Connectable by Internet box
No
Product use function
Lighting management
Documentation
2 documents
Instruction Use
LE15904AA | PDF (2.6 MB) | IT · EN · FR · DE · ES · NL · PT
Technical Sheet
ST-00002842-EN | PDF (591 KB) | EN