Replaceable cartridge for SPD item F10HP4
BT-F10HPS
|
8005543667248
Description
Consumer unit protection for installations whose local prospective short-circuit current (Icc) is limited to 6 kA. - 3P+N
Product characteristics
- IP20
- Uc= 275Vac Up= 1.3kV Imax= 10kA In= 5kA
Recommendations / Restrictions
- To ensure proper protection, a lightning arrester is recommended:- at the origin of each installation (obligatory depending on the type and location of the installation to be protected,- at the origin of divisional switchboards: secondary protection or fine protection of sensitive equipment,- on all outputs of external electrical circuits (supply to secondary buildings, external lighting or external electrical panels, etc.).A communication network arrester should always be installed to protect communication equipment in the presence of lightning arresters on the low-voltage network.Translated with www.DeepL.com/Translator (free version)
Products benefits
Installation
- On 35 mm DIN rail according to DIN 35 profile or EN 60715, rails 7.5 or 15 mm deep.
Technical Characteristics
System configuration DC
No
System configuration IT
No
System configuration TN
No
System configuration TN-C
No
System configuration TN-C-S
No
System configuration TN-S
Yes
System configuration TT
Yes
System configuration other
No
Nominal discharge surge current In (8/20)
5 kA
Max. discharge surge current (8/20)
10 kA
Nominal voltage AC
230 V
Max. continuous voltage AC
275 V
Short-circuit breaking capacity (Isccr)
10 kA
Mounting method
DIN rail (top hat rail) 35 mm
With remote signalling contact
No
Signalling at the device
Optical
Degree of protection (IP)
IP20
Frequency (Min-Max)
50-60 Hz
Electric supplying direction
Other
Connection type
Not applicable
Connection type
Other