SPD + Mcb - 1P+N - Type T2 - Imax=20kA - Up=1.7kV - Uc=320Vac - 2 modules
BT-F10AZC2
|
8005543667217
Description
Add-on surge protective devices for installations supplied with 230/400 V (50-60 Hz). SPDs T2 (Class II) recommended for the protection of secondary distribution boards.
Product characteristics
- IP20
- 1P+N
- Type T2 Imax=20kA Up=1,2kVUc=320Vac
- 2+2 modules
- with auxiliary contact
Recommendations / Restrictions
- To ensure correct protection, an SPD is recommended:- at the origin of each installation (compulsory depending on the type andlocation of the installation to be protected)- at secondary distribution board feeding sensitive equipment- on all outdoor electrical circuit outgoing lines (power supply forsecondary buildings, outdoor lighting or outdoor distribution boards
Products benefits
Installation
- On 35 mm DIN rail according to DIN 35 profile or EN 60715, rails 7.5 or 15 mm deep.
Usage
- Equipped with an auxiliary unit for the remote monitoring of the status of both the SPD and also the associated MCB.
Technical Characteristics
System configuration DC
No
System configuration IT
No
System configuration TN
Yes
System configuration TN-C
Yes
System configuration TN-C-S
Yes
Number of conductors (without earthing)
2
Max. conductor cross section solid (solid, stranded)
35 mm²
Max. conductor cross section flexible (fine-strand)
25 mm²
Degree of protection (IP)
IP20
Documentation
2 documents
Technical Sheet
IDP000311EN_01 | PDF (572 KB) | EN
Instruction Use
LE12003AA | PDF (578 KB)