How to install | Bticino International

WIRING

The installation of a smart electrical system is similar to the traditional one, regardless of its modularity. You just have to remember that:

a connected device must always be powered by Phase and Neutral cables. This requirement does not apply to the 2-module dimmer/switch, which can easily replace a traditional switch as it does not require the connection of the Neutral cable.
only one connected device per light point is necessary, the other control elements are traditional.

Watch the complete wiring diagram – Modular standard

Watch the complete wiring diagram – European standard

ADD THE GATEWAY

The gateway is the heart of the Smart system, it receives the signal from all connected devices and makes possible the connection with the wi-fi router.
It is necessary only one gateway for electrical Smart system to be placed in an accessible point of the house with a good wi-fi signal for proper operation.

Discover all Living Now gateways - European standard >
Discover all Living Now gateways - Modular standard >

Discover all Livinglight gateways - European standard >
Discover all Livinglight gateways – Modular standard >

Discover all Classia gateways - European standard >
Discover all Classia gateways – Modular standard >

Smart DIN Gateway - FC80GT
Install the gateway in the switchboard, if well reached by the wi-fi signal.

INSTALLATION AND ASSOCIATION OF SMART DEVICES

Important note: the procedure does not change according to the modularity or wiring devices, but it is always the same

Install and wire connected devices like traditional ones

In place of a traditional device, install the connected device of the corresponding type: one for each control line. Remember to also connect the Neutral cable.

Test connected devices

The connected device is already working; you can then test the electrical system by activating the various loads.

Switch the system off and on

Associate smart devices

Press the Home/Away master scenario control supplied with the gateway for 5 seconds. Devices are associated to each other.

Set up the App Home + Control

Download the App Home + Control for free from Google Play or Apple Store and configure it.

Set up voice assistant

Finally, associate your client's preferred voice assistant by following the specific procedure.

WIRELESS CONTROLS INSTALLATION

Expand the electrical system with wireless controls to manage lights, shutters, sockets and scenarios: place a wireless control wherever you want, even where you had not foreseen it. No wiring is required because the wireless controls are equipped with a long-life CR2032 battery.
Important note: the procedure does not change according to the modularity or wiring devices, but it is always the same

WALL MOUNTED INSTALLATION:

Associate the control with a simple action

Install the control using the supplied double-sided tape

The control is ready to be used

POWER SUPPLY WITH LONG-LIFE BATTERIES

The control is powered by a CR2032 battery, capable of guaranteeing
operation for 8 years.

FLUSH MOUNTED INSTALLATION:

Install the control

Remove the control from its enclosure

Associate the control with a simple action

The control is ready to be used

POWER SUPPLY WITH LONG-LIFE BATTERIES

The control is powered by a CR2032 battery, capable of guaranteeing operation for 8 years. The replacement does not require any tools.

SMART DEVICES FOR THE ELECTRICAL SYSTEM

The Smart electrical system consists of devices that allow you to manage lights, sockets, shutters and scenarios.

LIGHTING MANAGEMENT

Connected Two way switch
The switch that can be used in the traditional way or remotely via the app or voice command.

Switch/Dimmer
Adjust the light level for optimum personal comfort.

Connected light relay
It controls the lights locally or remotely. It can be connected to one or more traditional pushbuttons, or it can be associated to one or more wireless controls.

Smart DIN Relay
Smart DIN module for light control with maximum absorption In=16A to be installed additionally or alternatively.

SOCKETS

Connected socket
A module that allows remote socket activation and consumption measurement.

Connected socket
A module that allows remote socket activation and consumption measurement.

Smart DIN Meter
Smart DIN module that measures the energy consumption of the entire single-phase system of the house (instantaneous, daily, monthly) and of the individual power lines.

Smart DIN load shedder
Smart DIN module that monitors the consumption of the entire electrical system, turns on / disconnects the loads and sets scenarios with priority and non-priority loads.

SHUTTERS

Shutter actuator
Shutter switch that, in addition to direct control, allows integration with scenarios or can be managed via the app.

Shutter actuator
Shutter switch that, in addition to direct control, allows integration with scenarios or can be managed via the app.

LOAD CONTROL

Smart DIN contactor
Smart DIN module for the control of single-phase loads <20 A. The Smart contactor allows the control (ON/OFF) of loads such as heaters, swimming pool pumps, induction plates, charging sockets for electric vehicles and much more.
Item FC80CC

SCENARIOS

They are wireless controls available in wall or flush mounted versions (1 or 2 modules) that control several functions simultaneously (sockets, lights, shutters).