Share

BTicino Power Control Station (PCS) is a product software developed to connect power breakers (and not only) to the PC by USB port, in order to provide the following main functions:

  • Check the ETU (Electronic Trip Unit) working, faults history and settings;
  • Update the product firmware;
  • Provide a basic diagnostics on ETU (trip test, measures check…);
  • Generate reports about data received by trip unit.

Above functions becomes really useful for BTicino technical Service, panel builders, installers and final customers.

Thanks to user profiling included in the software, it’s possible to discriminate the products and functions enabled for customers, rather than ones for internal BTicino use only.

Installation requirements

Hardware Requirements

  • Personal Computer with Pentium III processor;
  • Minimum RAM memory 1GB, recommended 2GB;
  • Resolution 1024 x 768;
  • 32 bit Colour;
  • Mouse.

Software Requirements

  • Windows 7 or greater;
  • Microsoft.NET 4.0 or greater.

Device Requirements

For devices which support the monitoring function (listed below) check the device technical version (note 1) or firmware version;

  • MEGABREAK MP4 2500-4000-6300 (Display firmware 2.5.5X)
  • MEGABREAK MP6 2500-4000-6300 (Display firmware 3.2.X) Product Version Protection Minimum compatible release
  • MEGATIKER M1 Thermal magnetic with earth fault protection (rev. 5 * mid 2016)
  • MEGATIKER M1 Earth fault protection only (rev. 5 * mid 2016)
  • MEGATIKER M2 Thermal magnetic with earth fault protection (rev. 5 * mid 2016)
  • MEGATIKER M2 Earth fault protection only (rev. 5 * mid 2016)
  • MEGATIKER M2 Electronic (rev. 4)
  • MEGATIKER M2 Electronic with earth fault protection (rev. 4)
  • MEGATIKER M4 Electronic (rev. 1)
  • MEGATIKER M5 Electronic (rev. 2)

note 1: the technical version is the 6th digit of the traceability code written on the product label