1. Catalogue
  2. Low-voltage protection and power distribution
  3. Btdin modular protection and command devices
  4. Surge protective devices (SPD)
  5. BT-F10AZC2
  • SPD + Mcb - 1P+N - Type T2 - Imax=20kA - Up=1.7kV - Uc=320Vac - 2 modules
Btdin BTicino

SPD + Mcb - 1P+N - Type T2 - Imax=20kA - Up=1.7kV - Uc=320Vac - 2 modules

BT-F10AZC2 | 8005543667217
Surge protection device (SPD) with modular circuit breaker associated - 1P+N - Type T2 - Imax=20kA - Up=1,7kV - Uc=320Vac - 2 modules - with auxiliary contact
Description

Add-on surge protective devices for installations supplied with 230/400 V (50-60 Hz). SPDs T2 (Class II) recommended for the protection of secondary distribution boards.

Product characteristics
  • IP20
  • 1P+N
  • Type T2 Imax=20kA Up=1,2kVUc=320Vac
  • 2+2 modules
  • with auxiliary contact
Recommendations / Restrictions
  • To ensure correct protection, an SPD is recommended:- at the origin of each installation (compulsory depending on the type andlocation of the installation to be protected)- at secondary distribution board feeding sensitive equipment- on all outdoor electrical circuit outgoing lines (power supply forsecondary buildings, outdoor lighting or outdoor distribution boards
Products benefits
Installation
  • On 35 mm DIN rail according to DIN 35 profile or EN 60715, rails 7.5 or 15 mm deep.
Usage
  • Equipped with an auxiliary unit for the remote monitoring of the status of both the SPD and also the associated MCB.
Technical Characteristics
System configuration DC No
System configuration IT No
System configuration TN No
System configuration TN-C No
System configuration TN-C-S No
System configuration TN-S Yes
System configuration TT Yes
System configuration other No
Number of conductors (without earthing) 2
Nominal discharge surge current In (8/20) 20 kA
Max. discharge surge current (8/20) 40 kA
Nominal voltage AC 230 V
Max. continuous voltage AC 260 V
Voltage protection level L-N 1.3 kV
Voltage protection level N-PE 1.1 kV
Short-circuit breaking capacity (Isccr) 25 kA
Mounting method DIN rail (top hat rail) 35 mm
Construction size 2 modular spacing
Max. conductor cross section solid (solid, stranded) 35 mm²
Max. conductor cross section flexible (fine-strand) 25 mm²
With remote signalling contact No
Signalling at the device Optical
Degree of protection (IP) IP20
Width 71.2 mm
Height 107.9 mm
Depth 77.5 mm
degree of impact strength (IK) IK04
Frequency (Min-Max) 50-60 Hz
Electric supplying direction By the top
Colour Grey
RAL-number 7035
Connection type Screw connection
Terminals capacity (Min-Max) 6-35 mm²
Connection type Cable
Documentation
2 documents
Technical Sheet
IDP000311EN_01 | PDF (572 KB) | EN
Instruction Use
LE12003AA | PDF (578 KB)