Switch Sensors are the suitable solution for every new service-sector room, from the smallest to the largest and can also be applied immediately in existing rooms.
The offer is made up of combined movement and lighting sensors which manage the load in On/Off. Supplied at 230 V can control all the main types of lamp on the market. Factory pre-adjustment gives immediate operation on first installation, while the availability of trimmers and remote controls means that the operation of the devices can be customised to satisfy the needs of every type of room.
The devices are subdivided into:
Suitable for the management of one circuit in areas with no natural light. The basic sensors only measure the general lighting level once, when movement is detected for the first time. As long as a presence is detected, even if the measured lighting level becomes greater than the configured brightness threshold, the sensor will not switch the lighting off.
The basic switch sensors all use PIR passive infrared sensors, a detection technology based on pyrolectric sensors, which measure the variations of temperature in the room. They are used in rooms without natural light such as toilets, corridors, storage closets, technical rooms, etc. The loads are activated/deactivated automatically on the basis of the movement detection. Management of a single load in on-off mode.
Suitable for the management of one circuit in areas with natural light. The advanced sensors measure the general lighting level continuously (not only the first time a presence is detected). If a presence is detected and if the lighting level measured becomes greater than the configured brightness threshold the sensor will switch the lighting off.
Advanced Switch Sensors can use two technologies – PIR and US (US technology based on sound waves). They are used in rooms with natural light such as: individual or collective offices, open spaces and meeting rooms. The loads are activated/deactivated manually (by command) or automatically on the basis of the presence detection or the lighting level. On-off mode load management.
Suitable for the management of several circuits in areas with natural light. They are installed in groups of rooms with natural light – open spaces, small shops and offices. The SCS sensors can use two technologies – PIR and US (US technology based on sound waves). The loads are activated/deactivated manually or automatically on the basis of the presence detection or the lighting level. On-off and dimmer mode load management.
BASIC SWITCH SENSORS | ADVANCED SWITCH SENSORS | KONNEX | |
---|---|---|---|
Type of solution | Stand-alone | Stand-alone | Systems |
Space to be checked | An area | An area | More areas |
Level of natural light | No | Yes | Yes |
Number of circuits to be controlled | A circuit | A circuit | One or more circuits |
Movement detection | Yes | Yes | Yes |
Movement + presence detection | Yes | Yes | Yes |
Measurement of the lighting level | Yes | Yes | Yes |
ON – OFF load management | Yes | Yes | Yes |
DIMMING load management | No | Yes | Yes |
Scenario management | No | No | Yes |
Supervision system | No | No | Yes |
Integration between different applications | No | No | Yes |
Based on the privacy, BTicino SPA, with headquarters in Varese Viale Borri 231, informs all users that this website don't use cookies for profiling and sending advertising messages based on the navigation history. For any further information about the cookies policy it is possible to read the whole document.
Per maggiori informazioni sulla privacy policy e sull’informativa cookie Read the document.
Ok