Create the systems as you have always done, using the new Classe 300EOS with Netatmo internal unit with SCS server function or the device MyHOMEServer1 with updated firmware.
MyHOME is the home automation solution, based on BUS technology with 2-wire twisted pair, designed to meet the different needs of:
There are infinite choices of the type of command to control the system: from digital commands to the smartphone with app Home + Control, from the touch screen to the voice commands.
The installer App for easy system configuration and design, available in two versions:
This new App allows to automatically recognise the devices in the system that need to be configured, to replicate in other homes the projects created and stored and to maintain the system remotely.
The MyHOME_Up App will be operational until January 31, 2023, then the system configuration will require the Home + Project App, after installing the updated MyHOMEServer1 gateway.
App with simple and intuitive interface for the management of the following functions:
The Apps are compatible with new systems equipped with the new MyHOMEServer1 with updated firmware or with the Classe 300EOS with Netatmo internal unit as SCS server.
In existing systems equipped with the classic MyHOMEServer1, the firmware must be updated to version 2.32.9 or later; this operation can be carried out independently by your Customer following the instructions at the following site: help.bticino.com/myhomeevolution.
The site also contains all the information to migrate from the MyHOME_Up App to the new Home + Control App.
In addition to using the Home + Control App, the MyHOME system can also be managed by the user in the following 4 ways:
HOMETOUCH is a simple and immediate interface with large 7” Touch Screen that brings all the home automation functions at your fingertips.
The device, to be used in conjunction with the MyHOMEServer1 webserver, is also a connected video door internal unit that can also manage calls, both locally and remotely, using a Smartphone and the free Door Entry for HOMETOUCH app.
HOMETOUCH cannot be installed if the Classe 300EOS with Netatmo internal unit is used as SCS gateway in the system.
If the system includes the Classe 300EOS with Netatmo video door entry unit used also for the SCS server function, the MyHOME functions can be managed through a specific home automation menu in the touch screen interface of the unit and via the built-in Amazon Alexa voice assistant.
Advanced “full touch” design devices with capacitive buttons with LED graphics that can be configured using the Digital Controls App.
The controls may also be expanded or re-configured for new functions, without any need for rewiring.
Devices equipped with load status LED signals, to be configured using the Home + Project App depending on the functions to be managed (lights, shutters, scenarios, etc.).
MyHOME is an open system that integrates easily and without any modification to the system, with the best third-party technologies, systems and devices in three different ways:
The BUS devices are wired using a two-wire cable (twisted pair), through which information and the 27V d.c. power are distributed.
The installation of the actuator devices follows the rules of traditional wiring, in addition of the BUS they are connected also to the 230V a.c. mains for load control.
In new systems where MyHOME is integrated with the video door entry system, the server function for connection with the Internet and management via app can be carried out by the Class 300EOS with Netatmo video internal unit.
If the system does not have the video door entry function or is provided without the Classe 300EOS with Netatmo, you will have to use the MyHOMESever1 device as a server. In this case you can also install the Hometouch touch for the centralized management of video door entry and home automation functions.
