Digital Controls – Living Now
These devices are characterized by the innovative full-button Living Now aesthetic and are equipped with capacitive buttons with LED graphics that can be selected using the MyHOME_Up app.
Solution for the management of lighting, electric rolling shutters and generic loads.
FEATURES
Online catalogue
Range
System composition
In the system there are two types of device:
- Controls, connected only to the Bus wire;
- Actuators, connected to the Bus wire and to the 230 Vac power line to manage the connected load.
Bus technology: All the devices connect each other using a 2 conductor cable, used for carrying information and the 27 Vdc power supply.
Aesthetic Integration: The original feature of the MyHOME_Up system, from the simple digital control to the most advanced Touch device, is the perfect integration in the Axolute, Livinglight and Màtix ranges.
Voice control - Living Now
These are some control to manage the lights, the controlled sockets and, through the scenarios, also the shutters, the alarm, the ideal temperature and the music to listen to.
8 key multifunction control - Axolute
It has 8 keys with backlit icons indicating the assigned functions; it can manage lighting, rolling shutter automation and scenario functions.
Glass control with capacitive sensors - Axolute
Device with capacitive sensor pushbuttons Each zone corresponding to a key is marked at the centre by a lit LED which varies in light intensity when touched.
Control with IR sensor - Livinglight
Device with brightness and infrared sensor to manage the lighting as a function of the presence of people and the amount of natural light.
Scenario control - Livinglight
Device with pushbuttons to manage up to 4 different scenarios saved in the F420 Scenario module or in the MH202 Scenario programmer.
Flush mounted actuator for rolling shutters - Axolute
Device with 2 internal interlocked relays to manage the motors of rolling shutters and electric shutters. It is completed with key covers with Up-Down silk-screen printing.
HOMETOUCH 7.5 inches
HOMETOUCH is a 7 ″ touch screen device for centralized control of all MyHOME_Up functions.
The system configuration
The commissioning of the system and the definition of the functions with the actuator control association, is easily carried out by using the MyHOME_Up app and the MyHOME Server1 gateway connected to the BUS and the Internet.
Association of the device functions.
This operation is performed via the specific MyHOME_Up app for Android and iOS smartphone and installing the MyHOMEServer1 Gateway in the system.
Basic module On/Off actuator
It is very compact for insertion in junction boxes and device holders.
DIN actuator for the lighting On/Off control
Available in versions with 2, 4 and 8 relays with 16A contacts and independent outputs. Has “zero crossing” load power supply for compact fluorescent lamps and LED lamps.
DIN actuator for the lighting dimmer control
Available in versions with output 0 – 10 V for electronic ballasts or drivers with powers up to 1000VA and for LED, CFL lamps with powers up to 300 W.
DIN actuator for the rolling shutter control
Available in the version with 2 and 4 relays to control the lighting but can be used in “relay interlock” mode to control rolling shutters and shutters.
Galleries
INSTALLATION
Installation suitability
The devices for light and rolling shutter Automation are installed in the same way as traditional devices.
Depending on the item the installation can be made:
- In flush mounted box;
- In Din switchboards;
- Wall mounted.
To connect the devices they must be Bus wired via non-polarised two-wire cable. The actuators that control the load must be connected also to the electrical mains.
All the devices must be configured to assign the address and the function to be made using the specific MyHOME_Up application.
