Central unit for load management
Devices to measure the current absorbed by the electrical system by means of toroids and to manage the actuators to avoid a blackout.
No more blackouts.
FEATURES
Online catalogue
Range
System composition
- The load management and control system consists of the following products:
- System power supply,
- Control center;
- Space-saving actuators with a single DIN module Recessed actuators in the Axolute and Livinglight ranges;
- Touch screen to control and view the status of the loads;
BUS technology All devices are connected to each other via a two-conductor cable, used for the transport of information and the 27 Vdc power supply.
Aesthetic integration The originality of the MyHOME_Up system, from the simple digital control to the most advanced Touch device, is the perfect integration with the; Axolute and Livinglight ranges.
Actuator with current sensor
Thanks to the integrated current sensor it measures the consumptions of the controlled load and disconnects it from the electrical mains to avoid a blackout.
Actuator
Actuator device to disconnect the load from the electrical mains to avoid a blackout. Available in the flush-mounting version to be associated to the socket or DIN modularity.
HOMETOUCH device for displaying and controlling loads.
The new HOMETOUCH can be integrated into the system, capable of displaying the status of the loads controlled by the control unit and forcing operation independently of the control unit itself.
The system configuration
The commissioning of the system and the definition of the functions with the actuator control association, is easily carried out by using the MyHOME_Up app and the MyHOME Server1 gateway connected to the BUS and the Internet.
Gallery
INSTALLATION
Installation suitability
The energy management system devices are installed in the same way as traditional devices. Depending on the item the installation can be made:
- In flush-mounted boxes;
- In DIN switchboards.
To connect the devices the BUS wiring must be made via unpolarised two-wire cable. All the devices must be configured to assign the address and the operating mode.
.
