Aesthetic part and functional part are separate
The flexible frame, on the back of the cover plate, can mask the defects of the wall works and hides any irregularities of imperfectly laid flush-mounting boxes and the external collar in the plasterboard boxes. All this guarantees a light point which adheres to every wall perfectly and under any conditions.
Follow step by step how to assemble the functional part and then the aesthetic part, for perfect results every time.
Living Now is mounted on traditional 2, 3, 4 or 6 module flush-mounting or plasterboard boxes.
The first operation consists in screwing the support on the box.
Finish the mounting of the functional part, then mount the protective shell.
The protective shell has preserved the functional part during the site works. Remove it before mounting the aesthetic part.
The covers must be coupled to the previously wired mechanisms and fastened to the support.
A simple click and the aesthetic part fits easily on the support.
In place of a traditional device, install the connected device of the corresponding type: one for each control line. Remember to connect the neutral wire as well.
The connected control is already functional; you can thus inspect the system by activating the various loads.
Switch the electric system off and on.
Press the In&Out master scenario control supplied with the gateway for 5 seconds.
Devices are associated automatically.
You can already use the IN&Out master scenario control for the activation of the general “Going Out” control.
Press the In&Out control supplied with the gateway for 5 seconds.
Place the devices to be associated in contact.
Install the Wireless control anywhere you want, based on the needs of your customer
With the new Living Now, you bring to your projects an innovative design, technical excellence and the possibility of a connected solution.