how to install
Installation based on a BUS system
The MyHOME_Up home-automation system for Living Now, uses BUS installation technology, flush-mounting and plasterboard box and configuration is by App.
How to install MyHome_UP devices
The typical layout of LIVING NOW does not change: to assemble the functional part before and then the aesthetic part
Installation of digital and voice controls
Digital and voice controls are installed in their respective flush mounted box and support, using an appropriate “frame” with 27 Vd.c. powered contacts. The Module for connection to the system BUS and any flush mounted actuators are installed on the support.
BUS installation technology
All devices are connected by means of a two-conductor wire (low-voltage electrical power supply 27 V d.c.).
How to put into operation the system
Only a few operations are needed to make a home-automation system.
1
Connect all the devices and the MyHOMEServer1 device to the BUS system. The self-learning procedure will be completely automatic. After a few minutes all the actuators will be working perfectly with default modes.
2
Open the MyHOME_Up App and connect to the system
3
Choose the object to control.
4
Select the devices to be associated.
Your work is finished; the actuator and its control are associated. All the data will be saved in the MyHOMEServer1 and will already be available for your customer in his Application.
Useful resources for installation
Consult the instruction sheet
With the new Living Now, you bring to your projects an innovative design, technical excellence and the possibility of a connected solution.